PAL: 1 – 25 frame/second NTSC: 1 – 30 frame/second Pure video stream or composite video & audio stream

PAL: 320*240 (QVGA), 640*480 (VGA)NTSC: 320*240 (QVGA), 640*480 (VGA)īrightness, chrominance, contrast, saturation, and image qualityĪutomatic White Balance (AWB), Automatic Gain Control (AGC), Backlight Compensation (BLC), Automatic Light Control /Electronic Light Control (ALC/ELC) Automatic fault recovery and automatic connection after network interruption.Supporting image shielding/image snapshot.Giving alarm in case of video loss or motion detection (settable defense zone and sensitivity).Network adaptation technology, supporting automatic video frame rate adjustment according to the network bandwidth.Supporting multiple network protocols: HTTP, TCP/IP, UDP, STMP, DDNS, DNS, SNTP, DHCP, FTP.

Supporting dynamic domain name resolution, as well as LAN and Internet (ADSL, Cable Modem).

Providing an SD card slot to facilitate local image storage.

Embedded Web Server to facilitate users to implement real-time front-end monitoring and setting management by a standard IE.

Supporting simultaneous browsing of a maximum of 10 users.

Adopting optimized H.264 video compression algorithm to easily implement low-bandwidth network transmission of high-definition images.

Powerful high-performance programmable media processor and high-speed video protocol processor.

Support wireless network (WI-FI/802.11b/g).

Built-in 15 IR LEDs to aid nighttime vision.

Step 5) Next, go to and sign for an account to finish your installation.Īstak Mole Camera IP Camera / Network Camera If there is no green light, then recheck your router to make sure that it is working and also check that the Ethernet cable is securely plugged into the camera and router. Step 4) Please check the Network Indicator on the front of the camera to make sure that the light is green this indicates that the camera is connected to the Internet. Step 3) Once you insert the power cable, the Power indicator light should turn green, and after a few seconds, the camera will also automatically start to pan and tilt this is normal. Step 2) Then plug the power adapter into a power socket, and the cable to the power slot on the back of your camera. Step 1) Plug one end of the Ethernet cable into the Ethernet port on the back of your camera, and the other end into your router. When we say plug and play camera, we mean it!

Astak yoics mole